Harbor Freight Tools 91053 Nail Gun User Manual


 
Skus
91053, 91054
For technical questions, please call 1-800-444-3353. Page 2
92147, & 92185
Specifications
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Item Description
Magazine Angle Models 91054 & 92147: 34 Degrees
Models 91053 & 92185: 28
Nail Size All Models:
.113” to .131” Shank / 2” to 3-1/2” Long Clipped Head / 8 to 10 Gauge
Nail Capacity
(Quantity)
All Models:
90 Per Load
Operating PSI All Models:
75 PSI to 125 PSI *
SCFM
Required
Models 91053 & 91054: 8 to 10 SCFM @ 90 PSI
Model 92147: 12 to 14 SCFM @ 100 PSI
Model 92185: 13 to 15 SCFM @ 100 PSI
Trigger Type All Models:
Full Sequential Safety Trip
Accessories All Models:
Carrying Case (Qty: 1) / Nails (Qty: 450).
Hex Wrenches (Qty: 4) / Air Tool Oil (Qty. 1).
Construction Models 91053 & 91054: Steel and Steel Alloy.
Models 92147 & 92185: Magnesium / Steel.
* The air pressure setting must not exceed job site regulations/restrictions. The air
pressure setting must not exceed 90 PSI when being used with work pieces that
have a thickness of less than 1-3/4”.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
REV 11/06