Filter
Top Products
7. To extinguish the flame, close the Thumb Wheel (7) by turning it completely clock-
wise. (See Figure A.)
8. Allow sufficient time for the Blow Torch to completely cool. Then, store the Blow
Torch in a safe location and out of reach of children.
SKU 91061 PAGE 7
INSPECTION, MAINTENANCE, AND CLEANING
1. Before each use, inspect the general condition of the Blow Torch. Check the
Blow Torch for loose connections and joints, cracked, bent, or broken parts,
damaged propane bottle, and any other condition that may affect the safe opera-
tion of the Blow Torch. If a problem occurs, have the problem corrected before
further use. Do not use damaged equipment.
2. When cleaning, use only water and a mild detergent. Do not use cleaners that
are combustible or corrosive.
3. When storing, always allow sufficient time for the Blow Torch to completely cool
down before storing. Do not store flammable liquids or materials in the area
surrounding the Blow Torch. Make sure the Blow Torch’s Tumb Wheel (7) is in its
“OFF” position.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTUER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.