Filter
Top Products
SKU 91670 For technical questions, please call 1-800-444-3353. Page 3
6. When loading staples, always adhere to all the instructions and
safety warnings provided in this manual. Reminder: Avoid injuries
from sharp staples when loading and cleaning this product.
7. Be sure material will accept staples. Always test the material to
see if the staples will hold the material you want to secure. Staples
will not hold stone, rock or metal. Best suited for roofing installation,
carpet installation, poly sheeting and upholstery.
Note: The Hammer Tacker is only to be used to strike the material to be
secured. Do not use for any other purpose.
Warning: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be
supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included
that are listed on Page 5. If any parts are missing or broken, please call
Harbor Freight Tools at the number on the cover of this manual.
Assembly Instructions
1. You must first load staples (not included) into the Hammer Tacker.
Press the Staple Feeder Button (1) by squeezing the sides together.
While squeezing, push inward and downward to unlock the Staple
Spring Feeder (2).
See Figures A & B.
Loading Area
Staple
Feeder
Button
(1)
Figure A
Handle (3)
Staples Exit
REV 06/04