Harbor Freight Tools 92147 Nail Gun User Manual


 
Skus
91053, 91054
For technical questions, please call 1-800-444-3353. Page 8
92147, & 92185
ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN
RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL.
Other people in the work area must also wear ANSI approved impact safety
goggles.
Warning! Make sure the Nailer is not attached to the air hose whenever loading the
tool.
1. Slide the Tab (64) back and the Latch (78) will hold it in place.
2. Holding the nailer with the nose pointing slightly down, load a stick of nails into the
top slot.
3. While holding the Tab back, carefully press the Latch. BE CAREFUL. When you
press the Latch (78), the Tab (64) will spring forward with force. Slowly and cautiously
allow the tab to slide forward.
Loading Nails
TAB (64)
(PULLED
BACK)
NAILS (91)
LATCH
(78)MAGAZINE
(74)