Filter
Top Products
V ~
A
xxxx/min.
no
SKU 92775 For technical questions, please call 1-800-444-3353 PAGE 7
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters Laboratories,
Incorporated
Volts
Alternating Current
Amperes
No Load
Revolutions Per Minute (RPM)
FIGURE C
SPECIFIC SAFETY RULES
1. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use the Charger in
areas near flammable chemicals, dusts, and vapors.
2. Maintain labels and nameplates on the Charger. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
3. To avoid electrical shock, never start or run the Charger in the rain. Never
allow water or other liquids to leak inside the body of the Charger.
4. Do not pull the Charger by its Power Cord or Charger Cables, or pull the
Power Cord or Charger Cables around sharp corners or edges. Keep the
Power Cord and Charger Cables away from heated surfaces.
5. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on any of the Switches on the Control Panel of the Charger.
6. Do not stand on the Charger. Standing on the Charger may cause it to tip,
causing personal injury and/or product damage.