Filter
Top Products
SKU 93142 For technical questions, please call 1-800-444-3353 PAGE 7
2. Chuck (4): Accepts up to 3/8”
shank
diameter Drill Bits (not included). To install a
Drill Bit with the Cordless Drill pointed away from your body, hold the Chuck Sleeve
firmly in place and turn the Chuck
clockwise
. Insert the shank of a Drill Bit all the
way into the Chuck. While holding the Chuck Sleeve in place, turn the Chuck
counterclockwise
to lock the Drill Bit in place. (See Figure A.)
3. Trigger (13): The Trigger is operated
manually
simply by squeezing the Trigger to
turn on the Cordless Drill and releasing pressure on the Trigger to turn off the
Cordless Drill. The drill will go faster the more the trigger is squeezed.
(See Figure A.)
4. Reversing Lever (16): The Reversing Lever Switch allows you to change the
rotational direction of the Cordless Drill. To change the rotational direction, make
sure the Cordless Drill is at a complete stop. For a
clockwise
rotation, move the
Switch to the
right
. For a
counterclockwise
rotation, move the Switch to the
left
.
(See Figure A.)
5. Torque Selector Ring: The Torque Selector Ring allows you to select up to 16
different driving torque settings, depending on the job required. To change the driving
torque, make sure the Cordless Drill is at a complete stop. Then, simply turn the
Torque Selector Ring to the desired setting. The drill setting is used to force the
chuck not to slip and is used when drilling. (See Figure A.)
BATTERY PACK
(15)
CHARGED
INDICATOR
CHARGING
INDICATOR
CHARGER
POWER CORD
CHARGER
(21)
FIGURE A
TRIGGER
(13)
CHUCK (4)
TORQUE SELECTOR RING
REV 05/05