Harbor Freight Tools 93629 Sander User Manual


 
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on page
8 are included, and the product is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the number shown on the cover of this
manual as soon as possible.
1.
SKU 93629 For technical questions, please call 1-800-444-3353 PAGE 2
2. Keep work area clean. Cluttered areas invite accidents.
3. Stay within air pressure capacity. Never operate the Air Sander above
90 PSI. Only to be used as a Sander, not to be used as grinder. Never use with
grinding disk.
WARNING! Use eye, breathing, and hearing protection. Always wear
ANSI approved safety impact goggles when using this Air Sander. Wear
an ANSI approved dust mask or respirator. And wear ANSI approved
hearing and clothing protection. Other people in the work area must also
wear appropriate ANSI approved safety equipment.
Item Description
Maximum Operating Air Pressure 90 PSI
Air Consumption 4.0 CFM @ 90 PSI
Air Inlet Size 1/4” - 18 NPT w/Filtation Screen
Free Speed 15,000 RPM
Sanding Disc Diameter 2”
Additional Features 90” Angled Head/Directional Side Exhaust
Paddle Type Throttle/Hook & Loop Fastening Pad
Accessories Fine Sanding Disc (Qty 1)/Medium Sanding Disc (Qty 1)
Coarse Sanding Dist (Qty 1)/Wrench (Qty 1)
New Weight 1.55 lbs.