Filter
Top Products
SKU 93632 For technical questions, please call 1-800-444-3353.
English
Page 4
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection,
Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Hold tool by insulated gripping surfaces when performing an operation where cutting tools may
contact hidden wiring or its own cord. Contact with a ‘live’ wire will exposed metal parts on the
tool ‘live’ and shock the operator.
2. Maintain labels and nameplates on the tool. These carry important information. If unreadable or
missing, contact Harbor Freight Tools for a replacement.
3. Always wear ANSI-approved safety impact eye goggles and heavy work gloves when using the
tool. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy
work gloves are available from Harbor Freight Tools.
4. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate
surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other
debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this
product in a damp or wet location.
5. When using a handheld power tool, always maintain a firm grip on the tool with both hands to
resist starting torque. Always have one hand on the Handle, and the other either on the Spade
Handle or Side Handle.
6. Always keep the extension cord away from moving parts on the tool.
7. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Drill.
8. Make sure the Drill bit being used is free from burrs and any other foreign matter which could
damage the tool.
9. Never leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
10. Always unplug the Drill from its electrical outlet before performing any inspection, maintenance,
or cleaning procedures.
11. Let Bits cool before touching, changing or adjusting them. Bits heat up dramatically while in use,
and are capable of severe burns.
12. Do not force the Drill. This tool will do the work better and safer at the speed and capacity for which it
was designed.
13. Always secure the workpiece in a vise or other appropriate device; never attempt to hold the
workpiece in your hand while drilling.
14. If the drill bit jams, release the trigger immediately; drill torque can cause injury.