Harbor Freight Tools 93657 Air Compressor User Manual


 
SKU 93657 For technical questions, please call 1-800-444-3353. Page 5
6. Make sure the Air Compressor is located on a flat, level, sturdy surface ca-
pable of supporting the weight of the Compressor and any additional tools
and equipment.
7. Industrial applications must follow OSHA guidelines.
8. Never stand on the Air Compressor. Serious injury could result if the Compres-
sor is tipped.
9. Never leave the Air Compressor unattended when it is plugged in and run-
ning. Turn off the Compressor, and unplug the unit before leaving.
10. Do not allow children and other unauthorized people to handle or play with
the Air Compressor.
11. Do not move or transport the Compressor if the unit is under pressure.
12. Do not force the Compressor. This tool will do the work better and safer at the
speed and capacity for which it was designed.
13. This Compressor will automatically shut off on overload or under excessive
heat. Should this occur, turn the Power Switch (34) to its “OFF” position. Wait until
the Compressor cools. Then, turn the Power Switch to its “ON” position to resume
work.
14. Spray painting only. Never use this unit with gasoline, kerosene, or any other
flammable solvent.
15.
WARNING! The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive harm).
(California Health & Safety code § 25249.5,
et seq.
)
16.
WARNING! People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.
17.
WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS