Filter
Top Products
Page 13
SKU 93974
For technical questions, please call 1-800-444-3353
Disconnect from the air source.
Warning! The Paint Cup and Spray Gun may still hold air pressure, fire the Spray Gun
toward scrap material until all of the pressure is expended.
1. Remove the Paint Cup.
2. Pour residual paint into the paint container and seal it.
3. Pour non-flammable paint thinner into the Paint Cup. If water based paint was used,
you can use water.
4. Secure the Paint Cup to the appropriate Gun and shake the liquid in the cup.
5. Connect to the air source and turn on the air compressor.
6. Spray the liquid onto a piece of scrap material until the spray material is free of paint.
7. Repeat if necessary.
8. After following the above procedure, use the cleaning brushes and to further clean the
Spray Guns.
9. Allow the Spray Guns to dry completely before storage.
Maintenance (continued)
seirosseccA
.ytQnoitpircseD
1puCtniaPdeeFnohpiS.zo23artxE
1puCtniaPdeeFnohpiS.zo8artxE
3hsurBeltsirBdnuoR
1hsurBeltsirBtal
F
5kciphtooTnedooW
1eldeeNgninaelC
01retliFtniaP
1
81-"4/1;DO"46/91(esoHlioceR’52
(TPNTUO/NI)sgnittiFssarBliaM)
1n
uGwolB
4
selzzoN
)eldeeNdna,ytefaS,derepaT,rebbuR(
1rotcennoCelaM
1rotcennoCelameF
1relpuoCelameF
1elppiNelaM
2elp
piNelameF
llor1epaTlaeSdaerhTepiP