Filter
Top Products
Page 2
SKU 94186 For technical questions, please call 1-800-444-3353
SPECIFICATIONS
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTION
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
233988
REV 06f; 09a
Item Description
Motor
1/3 HP (maximum); 120VAC, 60 Hz; 3450 RPM;
Sealed radial armature bearings
Line Cord 3-prong grounded plug, 5.5 feet long, 18 AWG x 3C
Spindle
1/2” x 12 TPI threads; Right side: forward threads;
Left side: reverse threads
Wheel Size 5” Dia.
Switch Lighted, rocker type
Grinding Wheels Once 35 grit and one 60 grit aluminum oxide
Overall Dimensions 5-3/4” L x 10-1/2” W x 7” H
Rest Dimensions
1” L x 2” W x 2-1/2” H; Brackets: 2-1/2” H x 3-1/2”;
Eye shields: 3-3/4” W x 1/8” Thick
Weight 9.1 lb.