Filter
Top Products
SKU 94371 For technical questions, please call 1-800-444-3353 Page 4
Battery Precautions
1. Read all instructions and warnings on the battery before charging the battery.
2. To avoid accidents, charge the supplied battery only. Do not use a different
charger with this battery.
3. Do not expose the battery to rain or wet conditions.
4. To avoid damage of cable and plug, never pull the cable to disconnect the
charger.
5. Do not use the charger if the cable or plug are damaged.
6. Repairs should be carried out by a qualified technician.
7. Do not touch the battery poles with any conductive source.
8. Do not store the battery in a box with other metal objects.
9. Do not throw the battery in a fire or in the general trash. Contact your local
hazardous waste disposal authority for proper disposal.
10. Do not drain the battery completely before recharging. Recharge fully.
11. Always switch to a fresh battery when tool performance begins to diminish.
Severe heat is most destructive to a battery; the more heat generated, the
faster the battery loses power. A battery that gets too hot can be permanently
damaged. Never over-discharge a battery by using the tool even after tool
performance is decreasing. Never attempt to discharge a tool’s battery by
continuing to pull the tool trigger. When tool performance begins to diminish,
stop the tool, recharge the battery and use the fresh battery for optimal
performance.
12. Recharge the battery monthly even if not used.
13. Always remove the battery from the Impact Driver before performing
inspection, maintenance, cleaning procedures, or storage.
14. Caution: Never charge Battery for more than 5 hours continuously. Charger
Adapter should not be left plugged in or charging for more than 5 hours.
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.