Filter
Top Products
SKU 94560 For technical questions, please call 1-800-444-3353 PAGE 12
ASSEMBLY INSTRUCTIONS
To Install A Saw Blade:
1. CAUTION! Always make sure the Power Switch (29) of the Jigsaw is in its
“OFF” position and the tool is unplugged from its electrical outlet prior to adding
any accessories or making adjustments to the tool.
2. Refer to the Chart below to select the proper Saw Blade (68, 69) for the material
being cut. (See Figure F.)
3. Open the Plastic Blade Guard (58). Press the clamp button on the Blade Chuck
(24). Insert the Saw Blade (68, 69) as far as it will go, making sure the teeth of
the Saw Blade face to the front of the tool. Then release the clamp button on the
Blade Chuck, and close the Plastic Blade Guard. (See Figure G.)
PLASTIC BLADE GUARD
(58)
SAW BLADE
(68, 69)
BLADE CHUCK
(24)
FIGURE G
BLADE SELECTION AND SUITABLE SPEED
Material Teeth Per Inch Speed Setting
Soft Wood 6 6
Hardwood 6 5
Plastic 12 4 ~ 6
Aluminum 12 3 ~ 6
Steel 24 2 ~ 4
Tile 24 1 ~ 3
Glass 32 1 ~ 3
Leather (Knife Edge) 4 ~ 6
Rubber (Knife Edge) 4 ~ 6
FIGURE F