Filter
Top Products
SKU 94560 For technical questions, please call 1-800-444-3353 PAGE 2
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, op-
erating, inspection, maintenance and cleaning procedures, parts list and assem-
bly diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
PRODUCT SPECIFICATIONS
Electrical Requirements 120 VAC / 60 Hz
Speed 800 ~ 3,000 SPM (Strokes Per Minute)
Power Cord 10’-4” Long / 18 AWG x 2 C SJT
Power Plug 2-Pole / Polarized
Power Switch 125 VAC / 10 A / Single Pole
Speed Control 6 Position, Variable Speed (Rotary Wheel Style)
Cutting Mode Control 4 Position, Straight Cutting & Orbital (Lever Style)
Laser Light Control 2 Position (Push Button)
Maximum Cutting Capacities 3-11/32” Deep (Wood Stock) / 1/4” Deep (Ferrous Stock)
Blade Chuck Type Spring Loaded, Quick Change T-Shank
Shoe Plate Angles 0° ~ 45° Left & Right Tilt (In 15° Increments)
Dust Chute Diameter 1-1/2” O.D.
Accessories 10 TPI Wood Cutting Blades (Qty. 2)
24 TPI Metal Cutting Blade
Rip Guide
Overall Dimensions 3-1/8” W x 10-1/4” L x 8-3/4” H
Unit Weight 6.4 Pounds
DANGER
LASER LIGHT
AVOIDDIRECTEYEEXPOSURE
Max. Output: 2.5 mW,
Wavelength: 650 nm
CLASS IIIa LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
CEN-TECH
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011
Manufacture Date:___________, _______
AVOIDEXPOSURE-
Laserlightisemittedfrom
thisaperture.
E194601