Harbor Freight Tools 94668 Work Light User Manual


 
Page 2 For technical questions, please call 1-888-866-5797. Item 94668
Specifications
Overall Length 17-1/2"
LED Lights 30
Charging Indicator Light 1
Light Wattage 40
Battery 7.2V, 600mA/H rechargeable NiMH, lasts up to 2 hours
Adapter 9V AC/DC
Includes Cigarette Lighter Charger, 2 additional hanging hooks
Important Safety Information
WARNING: When using product, basic
safety precautions should always be
followed to reduce the risk of personal
injury and damage to equipment.
1. Keep work area clean and well
lighted. Cluttered areas invite injuries.
2. Store idle equipment. When not in
use, the Worklight must be stored in a
dry location. Always lock up products
and keep out of reach of children.
3. Use the right product for the job. There
are certain applications for which the
Worklight was designed. Do not modify the
Worklight and do not use the Worklight for
a purpose for which it was not intended.
4. Check for damaged parts. Before
using any product, any part that appears
damaged should be carefully checked
to determine that it will operate properly
and perform its intended function.
Check for any broken or damaged
parts and any other conditions that may
affect its operation. Replace or repair
damaged or worn parts immediately.
5. Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty.
6. Do not operate product if under the
influence of alcohol or drugs. Read
warning labels on prescriptions to
determine if your judgment or reflexes
are impaired while taking drugs. If there
is any doubt, do not operate the product.
7. Do not expose the Worklight to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
8. Do not abuse the Power Cord. Never
use the Power Cord to carry the
Worklight or to pull the Plug from an
outlet. Keep the Power Cord away
from heat, oil, sharp edges, or moving
parts. Replace damaged Power Cords
immediately. Damaged Power Cords
increase the risk of electric shock.
9. Disconnect the Power Cord
before making any adjustments,
changing accessories, or storing
the Worklight. Such preventive
safety measures reduce the risk of
turning on the product accidentally.
10. Never leave the Worklight unattended
when it is plugged into an electrical
outlet. Turn off the Worklight and
unplug it from its electrical outlet
before leaving the work area.
11. People with pacemakers should consult
their physician(s) before use.
Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference
or pacemaker failure.