Filter
Top Products
SKU 95346 For technical questions, please call 1-800-444-3353 PAGE 7
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on
pages 14, 16, and 18 are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMBLY
FIGURE A
AUGER
(33a)
TRANSMISSION SHAFT
(15a)
PIN (34a)
SAFETY PIN (35a)
Insert the shank of the Auger (33a) fully upward into the Transmission Shaft (15a).
Align the mounting holes in the Auger and Transmission Shaft. Then secure the
Auger to the Auger Drill, using the Pin (34a) and Safety Pin (35a).
(See Figure A.)
ADDITIONAL PRECAUTIONS
1. DANGER! People with pacemakers should not use this tool. This tool produces
strong electromagnetic elds that can cause pacemaker interference or pacemaker
failure. People with pacemakers should consult their physician(s) for advice.
2. WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.