Harbor Freight Tools 9592 Air Compressor User Manual


 
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. THIS AIR COMPRESSOR PUMP IS DESIGNED FOR USE ONLY WITH A
3 HORSEPOWER MOTOR 3,400 RPM (not included).
2. WARNING! Make sure to fill the Air Compressor Pump with a premium quality,
30-weight, non-detergent oil before each use. Running the Air Compressor
Pump with no oil or low oil will cause damage to the equipment.
3. WHEN FILLING WITH OIL: Make sure to unscrew (do not pull) the Oil Fill Plug
(part #20) out. (See Figure D.)
4. MAKE SURE ALL TOOLS AND EQUIPMENT USED WITH THE AIR
COMPRESSOR PUMP ARE RATED TO THE APPROPRIATE CAPACITY. Do
not use any tool or equipment that does not operate from 0 to 140 PSI.
5. MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Always keep the work
area free of obstructions, grease, oil, trash, and other debris. Do not use the Air
Compressor Pump in areas near flammable chemicals, dusts, and vapors.
6. AVOID INJURY: Never direct the Exhaust Elbow (part #3) at people or animals.
(See Figure D.)
7. AVOID BURNS: The Air Compressor Pump becomes very hot during use and for
a while after its use. Do not touch the Air Compressor Pump until it has com-
pletely cooled.
8. WARNING! DO NOT USE THE AIR COMPRESSOR PUMP UNTIL A PROP-
ERLY FUNCTIONING PULLEY/BELT GUARD (not included) HAS BEEN
INSTALLED. (See Figure C.)
SKU 09592 PAGE 4
10. WARNING! This product contains or produces a chemical known to the State of
California to cause cancer and birth defects (or other reproductive harm).
(California Health & Safety Code 25249.5 et seq.)
9. BEFORE PERFORMING ANY INSPECTION, MAINTENANCE, OR CLEANING
PROCEDURES, MAKE SURE ALL AIR PRESSURE HAS BEEN RELEASED
FROM THE AIR COMPRESSOR’S TANK (not included) AND THAT THE
EQUIPMENT IS UNPLUGGED FROM ITS ELECTRICAL OUTLET, and ALL
COMPONENTS HVAE COLLED.