Harbor Freight Tools 96141 Work Light User Manual


 
Page 2SKU 96141
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Light Source 16, 12000 MCD LED’s
Construction
Body: Silver Polypropylene plastic,
Lens Bumper: black rubber,
Rear Bumper: black rubber,
Handle: black polypropylene plastic with black rubber grip,
Trigger: black plastic
AC/DC Adapter Input 120 V~, 60 Hz, 7 W
AC/DC Adapter Output 9 VDC, 300 mA
Rechargeable Battery
3FM 2.8, constant voltage charge,
cycle use: 7.2-7.5V, standby use: 6.75-6.9V
LED Indicators
Green (charged)
Red (charging)
Charging Time 12 Hours
Approximate Run Time
(fully charged)
High Intensity Mode-12 hours;
Low Intensity Mode-28 hours
Overall Dimensions 8-5/8” L x 3-5/16” W x 9” H
Wire Length 69”
Weight 2.5 lb.
Special Features
Low voltage and overcharging protection,
auto shut off when battery is fully charged
Cigarette Plug Adapter
Save This Manual
You will need this manual for the safety warnings and precautions, operating, inspec-
tion, maintenance and cleaning procedures. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Write the product’s serial number in
the back of the manual near the assembly diagram, or write month and year of purchase
if product has no number. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
1.
REV 07f