Harbor Freight Tools 96141 Work Light User Manual


 
Page 4SKU 96141
For technical questions, please call 1-800-444-3353.
OPERATION
The Spotlight can be charged in three different ways by cranking the Handle, using
the 120 V~ Adapter, or using the Cigarette Plug Adapter.
The Green LED will indicate when the battery is fully charged. A red LED will indi-
cate that the battery is charging.
Charging with the Cranking Handle
Handle
Indicator LED’s
Charge
Figure 1
Pull out the Handle as shown in Figure 1.
Grasp the Handle and crank it continuously clockwise. The red LED will stay on while
the Spotlight is charging. For every 3 minutes of turning the handle you will get one
minute of light. The Green LED will come on when the Spotlight is fully charged.
When finished, fold the Handle back into its slot when done cranking.
Using the Cigarette Plug Adapter
Insert the plug end into the charge receptacle on the Spotlight.
Plug the Cigarette Plug Adapter into the vehicle’s cigarette lighter socket.
Allow the Spotlight to charge until the green LED comes on.
To prevent the vehicle’s battery from running down, charge the spotlight only when
the vehicle’s engine is running.
The Green LED will come on when the Spotlight is fully charged.
1.
2.
1.
2.
3.
1.
2.
3.
4.
5.