Filter
Top Products
Page 6SKU 97626 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 120 V~ / 60 Hz
Rotation Speed 16,000 RPM
Collet Size 3/32”, 1/32”, and two 1/8”
UNPACKING
When unpacking, check to make
sure that the item is intact and undam-
aged. If any parts are missing or broken,
please call Harbor Freight Tools at the
number shown on the cover of this manual
as soon as possible.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Tool Set Up
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
General Operating Instructions
Designate a work area that is clean 1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Secure loose workpieces using a vise 2.
or clamps (not included) to prevent
movement while working.
There must not be hazardous objects, 3.
such as utility lines or foreign objects,
nearby that will present a hazard
while working.
Accessory Tips
Mandrels are the shanks with a •
threaded or screw head. Use
them with the cut-off wheels,
polishing wheels, and sanding
discs. The shank without threads
on the end is for the felt polishing
wheels.
The Mounted Stones are used for •
sharpening cutting tools, screw-
drivers etc, deburring metal after
cutting, and removing excess
material on metal and ceramics.
The Sanding Drums can be used •
to smooth out rough areas on
soft materials.
The Cut-off Wheels are used •
for cutting, carving and slotting
materials.
The Bufng Wheels are used to •
polish materials.
The Wire Wheels are used to •
clean dirty or rusted surfaces.
The Whet Stone is used to •
sharpen the Drill Bits.
The Drill Bits can be used to bore •
small holes.
Hold the Lock Button down and un-4.
screw the Collar.
WARNING