Filter
Top Products
Page 4SKU 98383 For technical questions, please call 1-800-444-3353.
correct insertion direction for Bolts
(8).
Attach the Scraper Plate (6) through 3.
the existing holes in each of the
Lower Handles (7) using the Nuts (5)
and the Bolts (4).
Figure 1
Drain Plug
Drain
4. Add weight to the Steel Lawn Roller
by standing the empty Roller Barrel
on it’s side with the Drain Hole up.
Remove the Drain Plug (2), then us-
ing a funnel (not supplied) carefully
pour water or sand into the opening
until full. (Sand would give maximum
weight.) See Figure 1.
Using two people for added safety, 5.
carefully lay the Steel Lawn Roller
onto the ground.
OPERATING INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Before operating the Steel Lawn 1.
Roller, put on ANSI-approved safety
goggles, steel toe shoes and other
safety gear. Safety goggles and
other safety gear are sold separately.
Roll the Steel Lawn Roller to the area 2.
to be compacted.
Use the Steel Lawn Roller as you 3.
would if you were mowing a lawn.
Roll one direction until all areas are
rolled, then roll the other direction till
area is completely rolled again.
If it is necessary to wash or clean 4.
debris from the Roller Barrel before
you are nished using it, be sure to
dry the surface with a towel or absor-
bent cloth to prevent a quick build up
of added debris.
When completely nished with your 5.
project, wash off the Steel Lawn
Roller with a hose and soft rag or
brush and let stand until completely
dry before storing. Store in garage or
shed away from children.
MAINTENANCE AND
SERVICING
TO PREVENT SERIOUS INJURY FROM
TOOL FAILURE:
Do not use damaged equipment. If any-
thing abnormal is noticed, or occurs while
using, have the problem corrected before
further use.
Procedures not
specically explained in this
manual must be performed only
by a qualied technician.