Harbor Freight Tools 90725 Laser Level User Manual


 
SKU 90725 Page 4
18. Be Eye Aware. Laser light can potentially harm the eye. WARNING: Do not
look directly into this laser, or the reflection of the light. Do not allow any other
person or animal to be exposed to the direct or reflected laser beam.
Warning: The warnings, cautions, and instructions discussed in
this instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included.
(1) Mini laser level
(1) Tripod
(3) 1.5V AG13 button cell batteries
(1) Instruction booklet
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
Assembly
1. To install batteries, unscrew the On/Off switch assembly, and insert three (3)
1.5v batteries (included). Be sure to install the batteries matching the polarity
marked in the battery compartment.
2. This level may be used with or without the tripod. To install or remove the
tripod, thread the tripod stud located on the tripod head into the bottom of
the level. The tripod swivels 360 degrees, and may be tilted at up to 90
degrees vertical. If using the tripod, adjust it as desired, and lock the level
into place using the thumb screw located on the tripod head.
3. The tripod legs may be extended and locked into place to provide greater
working height or to compensate for an uneven surface.
90725 Laser Level.P65 10/13/03, 9:06 AM4