Filter
Top Products
2
598-1286-01
WIRINGINSTALLATION
For best performance, mount the fixture about 6 feet (1.8
m) above the ground.
1. Remove two decorative nuts.
2. Remove X-Bar.
3. Tighten mounting screws on X-Bar finger tight.
4. Attach X-Bar to junction box.
Junction Box
X-Bar
Decorative Nut
Lantern
Lantern Mounting
Screw
X-Bar
One Motion Light
Two Motion Lights
CAUTION: DO NOT connect the RED wire unless
you want to control other lights from the motion
sensor (see Optional Wiring).
Note: All wiring must be run in accordance with the
Canadian Electrical Code through conduit or another
acceptable means. Contact a qualified electrician if there
is any question as to the suitability of the system.
WARNING: Turn power o at circuit breaker
or fuse.
Bracket Mounting
Screw
Connect the fixture wires to the wires in the junction
box. Twist the wires together and secure with wire con-
nectors.
Note: We recommend having an assistant help hold the
lantern assembly during the wiring process.
Black
White
Green or
Bare
Black
White
Green or
Bare