Heath Zenith 598-1283-00 Work Light User Manual


 
This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
Requirements
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
Some codes require installation by a
qualified electrician.
Features
• Light comes on when motion is detected
• Automatically turns light off
DualBrite
®
2-level lighting
• Bulb Saver technology
• Multiple operating modes
• Photocell keeps the light off during daylight
hours
© 2007 DESA Specialty Products™ 598-1283-00
MANUAL MODE
... back on.
1 Second
OFF then...
OPERATION
* resets to Auto Mode at dawn.
TEST
TEST 1 5 10 MIN
AUTO
TEST 1 5 10 MIN
Motion Sensing Coach
Light with DualBrite
®
and
Bulb Saver Technologies
Set the ON-TIME switch on
the bottom of the cover plate
to TEST and the DualBrite
®
switch OFF.
Set ON-TIME switch to
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 10 position.
Mode: On-Time: Works: Day Night
Test
5 Sec x x
Normal
1, 5, 10 min. x
Manual
Until Dawn* x
Accent
3, 6 Hr, to Dawn x
ON-TIME
ON-TIME
Before installation, record the model number
from back of fixture below. Attach receipt in
case of possible warranty issues.