Filter
Top Products
9090A
4
6
6
Apply grease (8).
The words “AIR SIDE” on diaphragm must face
toward diaphragm shaft.
3
4
Flat side of air-side diaphragm plate must face
toward diaphragm shaft.
5
Apply medium-strength (blue) LoctiteR (9) or
equivalent to threads, and torque to 80 to 90 in-lb
(9 to 10 N-m) at 100 rpm maximum.
6
2
3
4
diaphragm shaft
6
muffler
fluidĆside
diaphragm plate
7
diaphragm shaft
screw
diaphragm
fluid cover
vee
clamp
Grounding Strip
vee clamp nut
outlet manifold
inlet
manifold
2
manifold bolt
1
2
1
1
2
Torque to 80 to 90 in-lb (9 to 10 N-m).
2
5
air-side diaphragm plate
2
manifold bolt
For older models using 186265 fluid-side
diaphragem plates, use 104893 o-ring. For newer
models using 191837 fluid-side diaphragm plates,
use 110004 o-ring.
10
NOTE: Parts shown with solid lines
in the drawing below are included in
the Air Motor Retrofit Kit.
3308983
Parts
Husky 716 Air Motor Retrofit Kit
Part No. 241631, with standard air motor
Part No. 241664, with remote-operated air motor
Ref.
No. Part No. Description Qty
1 240224 MOTOR, air, standard
Included in Kit 241631
See manual 308981 for parts.
1
1 241255 MOTOR, air, remote-operated
Included in Kit 241664
See manual 308981 for parts.
1
2 194246 COVER, air 2
3 114882 SCREW, torx 12
4 290045 PLATE, designation 1
5 111183 RIVET, for designation plate (4) 2
6 110636 O-RING 8
7 110004 PACKING, o-ring 2
7 104893 PACKING, o-ring 2
8 111920 LUBRICANT, grease (not shown) 1
9 113500 ADHESIVE, anaerobic (not shown) 1
10 108808 PACKING, u-cup (not shown)
For diaphragm shaft
2