Hilti TE3000-AVR Power Hammer User Manual


 
Fault Possible cause Remedy
The power tool doesn’t start
and the indicator lamp blinks
yellow.
The power tool has not been
unlocked (power tools with optional
theft protection system).
Usethe TPSkey tounlock thepower
tool.
The power tool doesn’t start
or cuts out during operation.
The extension cord is too long or its
gauge is inadequate.
Use an extension cord of an
approved length and / or of
adequate gauge.
NOTE
If the fault cannot be eliminated by the measures listed above, have the power tool checked by Hilti Service.
10. Disposal
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, Hilti has already made
arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer
service department or Hilti representative for further information.
11. Manufacturer’s warranty - tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid
so long as the tool is operated and handled correctly,
cleaned andserviced properly andin accordance with
the Hilti Operating Instructions, and the technical
system is maintained. This means that only original
Hilti consumables, components and spare parts may
be used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire
lifespan of the tool. Parts requiring repair or replace-
ment as a result of normal wear and tear are not
covered by this warranty.
Additionalclaimsareexcluded,unlessstringentna-
tional rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, inciden-
tal or consequential damages, losses or expenses
in connection with, or by reason of, the use of,
or inability to use the tool for any purpose. Im-
plied warranties of merchantability or fitness for a
particular purpose are specifically excluded.
For repair or replacement, send the tool or related
parts immediately upon discovery of the defect to
the address of the local Hilti marketing organization
provided.
This constitutes Hilti’s entire obligation with regard
to warranty and supersedes all prior or contempo-
raneous comments and oral or written agreements
concerning warranties.
en
12