Filter
Top Products
Obligation signs
Weareye
protection
Wearahard
hat
Wearear
protection
Wear
protective
gloves
Wearsafety
shoes
Wear
breathing
protection
Symbols
Readthe
operating
instructions
beforeuse
Returnwaste
materialfor
recycling.
Volts Amps
Alternating
current
Hertz Locksymbol Equippedwith
theft
protection
system
Location of identification data on the power tool
The type designation and serial number can be found
on thetype identificationplate on themachine ortool.
Makea noteof thisdata inyour operatinginstructions
and always referto it when makingan enquiry to your
Hilti representative or service department.
Type:
Generation: 02
Serial no.:
2. Description
2.1 Use of the product as directed
The powertool isa hand-guidedelectric toolfor chiselingon concrete, masonryand asphalt.Other applications
are compacting and excavation (e.g. in soil).
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed forprofessional use and may be operated, serviced andmaintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
Its typical working environment is construction sites of all kinds and it may be used for construction work,
finishing, renovation, demolition and road work.
The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Modification of the power tool or tampering with its parts is not permissible.
en
2