Filter
Top Products
Noise and vibration information for the WSC 70
ತ
A36 (measured in accordance with EN 60745-2-
5 prAA: 2006):
Typical A-weighted sound power level 108 dB (A)
Typical A-weighted emission sound pressure level. 97 dB (A)
Uncertainty for the given sound level
3dB(A)
Triaxial vibration values (vibration vector sum)
Sawing i n wood, A
h
<2.5m/st
Uncertainty (K) 1.5 m/st
Noise and vibration information for the WSC 55
ತ
A24 (measured in accordance with EN 60745-2-
5 prAA: 2006):
Typical A-weighted sound power level 106 dB (A)
Typical A-weighted emission sound pressure level. 95 dB (A)
Uncertainty for the given sound level
3dB(A)
Triaxial vibration values (vibration vector sum)
Sawing i n wood, A
h
<2.5m/st
Uncertainty (K) 1.5 m/st
Battery B 36/2.4 NiCd B 36/3.3 Li-ion B 24/2.0 NiCd
Rated voltage 36 V 36 V 24 V
Capacity
2.4Ah 3.3Ah 2Ah
Energy capacity 86.4 Wh 118.8 Wh 48 Wh
Temperature monitoring
NTC NTC NTC
Weight 2.08 kg 1.6 5 kg 1.37 kg
Type of cell
Nickel-cadmium Lithium-ion Nickel-cadmium
No. of cells
30 30 20
5. Safety rules
NOTE
The safety rules in section 5.1 contain all general
safety rules for power tools which, in accordance
with the applicable standards, require to be listed in
the operating instructions. Accordingly, some of the
rules listed may not be relevant to this tool.
5.1 General safety rules
WARNING! Readall instructions! Failuretofollow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term “power tool” in
all of the warnings listed below refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool. SAVE THESE INSTRUCTIONS.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders a way while oper-
ating a power tool. Distractions can cause you to
lose control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
en
21