Filter
Top Products
14
en
2. Description
2.1 Correct use
The tool is an electrically-powered orbital action jig saw
for cutting wood, plastic, metal, plasterboard (drywall
panel) and fiberboard. It is designed for professional
use.
The working environment may be a construction site,
workshop, occupied living accommodation or other work-
space and the work carried out may include construc-
tion, renovation or conversion. Use of the tool for cut-
ting materials containing asbestos is not permissible.
The tool may be powered only by an electric supply pro-
viding a voltage and frequency in compliance with the
specification given on its rating plate.
The items supplied include:
– Electric tool incl. saw blade
– Operating instructions,
– Packaging
– Accessories (dust removal module, anti-splinter insert,
dust removal adaptor, low-friction baseplate cover,
hex. socket wrench, dust removal hood)
3. Tools and accessories
Saw blade W-CS
Dust removal module WSJ-DRS
Anti-splinter insert W-ASJ SS
Dust removal adaptor W-ASJ AS
Low-friction baseplate cover W-ASJ GL
Hex. socket wrench 5-W-A SW5
Dust removal hood W-ASJ AH
3.1 WSJ-DRS dust removal module
3.1.1 General information
Location of identification data on the tool
The type designation and serial number can be found on
the rating plate on the tool. Make a note of this data in
your operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
department.
Type: WSJ-DRS
Serial no.:
3.1.2 Safety
Use as directed
The WSJ-DRS may be used only in conjunction with the
WSJ 850-ET and WSJ 850-EB.
Use of the WSJ DRS for materials containing asbestos
or for metal, glass and carbon fiber dust is not permis-
sible.
Use of the WSJ-DRS for damp or explosive dust is not
permissible.
3.1.3 General safety precautions
● When changing the filter, hold the tool and/or the WSJ-
DRS so that the filter drawer can be pulled out verti-
cally downwards. This prevents dust escaping.
● We recommend that breathing protection is worn
when changing the filter.
3.1.4 Technical data
WSJ-DRS dust removal module for the WSJ 850-ET and
WSJ 850-EB
Power input 80 W
Suction performance 400 l/min
Weight 250 g
Dimensions (LxWxH) 150x60x100 mm
3.1.5 Before use
-NOTE-
The dust removal hood must be fitted in front of the saw
blade when the dust removal module is in use (see 6.5).
Attaching the dust removal module ẅ
1. Unplug the supply cord from the electric socket.
2. Fit the dust removal adaptor into the opening on the
tool.
3. Push the dust removal adaptor toward the tool from
below until it engages.
4. Push the dust removal module onto the tool and the
dust removal adaptor until it is heard to engage.
Detaching the dust removal module
1. Unplug the supply cord from the electric socket.
2. Press the two buttons on the dust removal module
(one on each side) and hold them in this position.
3. Pull the dust removal module away from the tool and
the dust removal adaptor toward the rear.
4. Release the dust removal adaptor from the tool by
pushing it downwards.
5. Push the dust removal adaptor downwards and pull it
out of the tool.