Filter
Top Products
English
9
FUNCTIONAL DESCRIPTION
NOTE: The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read
and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that
differ from those on your own power tool.
NAME OF PARTS
SPECIFICATIONS
Fig. 1
Housing
Tool holder
Bar type handle
Nameplate
Cap cover
Set screw
Switch trigger
Brush cap
(under the cap cover)
Motor Single-Phase, Series Commutator Motor.
Power Source Single-Phase, 120 V 60 Hz
Current 10 A
Capacity Drill Bit: 2" (50 mm)
Core Bit: 5" (125 mm)
No-Load Speed 300/min
Full-load Blow 2,450/min
Weight 19.2 lbs (8.7 kg)
D type handle
01Eng_DH50SB_US 25/5/07, 17:009