Filter
Top Products
English
21
1.2 Using as an auxiliary light (Light equipped
hook)
(1) Press the switch to turn off the light.
If forgotten, the light will turn off
automatically after 15 minutes. (Fig. 12)
(2) The direction of the light can be adjusted
within the range of hook positions 1 - 5. (Fig.
7)
⅜ Lighting time
AAAA manganese batteries: approx. 15
hrs.
AAAA alkali batteries: approx. 30 hrs.
CAUTION:
● Do not look directly into the light.
Such actions could result in eye injury.
1.3 Replacing the batteries (Light equipped hook)
(1) Loosen the hook screw with a phillips-head
screwdriver (No. 1). (Fig. 13)
Remove the hook cover by pushing in the
direction of the arrow. (Fig. 14)
(2) Remove the old batteries and insert the new
batteries. Align with the hook indications and
position the plus (+) and minus (-) terminals
correctly. (Fig. 15)
(3) Align the indentation in the hook main body
with the protuberance of the hook cover,
press the hook cover in the direction opposite
to that of the arrow shown in Fig. 14 and then
tighten the screw.
Use commercially available AAAA batteries
(1.5 V).
NOTE:
Do not tighten the screw excessively. Such
action could strip the screw threads.
CAUTION:
● Failure to observe the following can result
in battery leakage, rust or malfunction.
Position the plus (+) and minus (-) terminals
correctly.
Replace both batteries at the same time. Do
not mix old and new batteries.
Remove exhausted batteries from the hook
immediately.
● Do not discard batteries together with normal trash and do not throw batteries into
fire.
Fig. 14
Fig. 12
Fig. 13
Switch
Hook
Phillips-head
screwdriver
Arrow
Hook cover
Hook main body
Protube-
rance
Inden-
tation
Fig. 15
AAAA
batteries
Indentation
Protube-
rance
Hook cover
Screw
Hook