Filter
Top Products
- 5 -
English
12. CHECK DAMAGED PARTS AND AIR LEAK.
Before further use of this compressor, guard or other
parts should be carefully checked to see that it will
operate properly and perform its intended function.
Check alignment of moving parts, binding of moving
parts, breakage of parts, mounting, air leak, and any
other conditions that may affect its operation.
A guard or other part that is damaged should be
properly repaired or replaced by an authorized service
center.
Have defective pilot valve replaced by authorized service
center.
Do not use this compressor if engine switch does not
turn it on and off.
13. NEVER USE THIS COMPRESSOR FOR
APPLICATIONS OTHER THAN THOSE
SPECIFIED.
Never use this compressor for applications other than
those specified in the Instruction Manual.
Never use compressed air for breathing or respiration.
14. HANDLE THIS COMPRESSOR CORRECTLY.
Operate this compressor according to the instructions
provided herein. Never allow this compressor to be
operated by children, individuals unfamiliar with its
operation or unauthorized personnel.
15. KEEP ALL SCREWS, BOLTS AND COVERS
TIGHTLY IN PLACE.
Keep all screws, bolts, and covers tightly mounted.
Check their conditions periodically.
16. NEVER USE A COMPRESSOR WHICH IS
DEFECTIVE OR OPERATING ABNORMALLY.
If this compressor appears to be operating unusually,
making strange noises, or otherwise appears defective,
stop using it immediately and arrange for repairs by a
Hitachi authorized service center.
17. DO NOT WIPE PLASTIC PARTS WITH SOLVENT.
Solvents such as gasoline, thinner, benzine, carbon
tetrachloride, and alcohol may damage and crack
plastic parts. Do not wipe plastic parts on this
compressor with such solvents. Wipe plastic parts with
a soft cloth lightly dampened with soapy water and dry
thoroughly.
18. USE ONLY GENUINE HITACHI REPLACEMENT
PARTS.
Replacement parts not manufactured by Hitachi may
void your warranty and can lead to malfunction, causing
injuries. Genuine Hitachi parts are available from your
dealer.
19. DO NOT MODIFY THIS COMPRESSOR.
Do not modify this compressor.
Do not operate at pressure or speed in excess of
manufacturer’s recommendations.
Always contact the Hitachi authorized service center
for any repairs. Unauthorized modification may
impair this compressor's performance and result in
accident or bodly injury.
20. TURN OFF THE ENGINE SWITCH WHEN THIS
COMPRESSOR IS NOT USED.
When this compressor is not used, push the knob of
the engine switch OFF and open the drain cock to
discharge the compressed air from the air tank.
21. NEVER TOUCH HOT SURFACE.
To reduce the risk of burns, never allow any part of
your body or other materials to contact with any
exposed metal parts on this compressor.
Never allow any part of your body to contact the
engine muffler or adjacent areas.
These areas can remain hot for at least 45 minutes
after this compressor is shutdown. Cool down before
servicing.
22. DO NOT DIRECT AIR STREAM AT BODY.
Do not direct air stream at persons or animals, to
avoid any bodily injury.
23. DRAIN TANK.
Discharge the drain after each use and every day.
When the tank gets corroded, there can be a risk of
breakdown. Accordingly, be sure to discharge the
drain inside the tank after each use. The drain
contains moisture in the air, abrasion particles, rust,
etc. To discharge the drain, therefore, gradually open
the drain cock, and be careful not to point it at your
face or eyes.
24. USE ONLY RECOMMENDED AIR HANDLING
PARTS ACCEPTABLE FOR PRESSURE NOT
LESS THAN 125 PSI (8.6 BAR)
Risk of bursting. Use only recommended air handling
parts acceptable for pressures not less than 125 psi
(8.6 bar).
25. SEE TO IT THAT FUEL IS SUPPLIED
APPROPRIATELY.
Follow all fueling instructions in operator’s manual.
Do not smoke while fueling.
Do not fill fuel tank while this compressor is running
or hot. Allow this compressor and engine to cool
down for two minutes before refueling.
Do not refuel indoors or in a poorly ventilated area.
Do not fill fuel tank to point of overflowing.
Always refuel slowly to avoid the possibility of spilled
fuel which may cause a fire.
Do not operate this compressor if gasoline is spilled.
Wipe this compressor clean and move it away from the
spill. Avoid creating any ignition until the gasoline has
evaporated. Allow approximately 1/4" of tank space for
fuel expansion.