Hitachi GP 2 Grinder User Manual


 
9
English
Fig. 1
SPECIFICATIONS
Motor Single-Phase, Series Commutator Motor
Power Source Single-Phase, 120 V AC 60Hz / DC
Current 4.7A
No-Load Speed 25,000 / min
Max. Wheel Diam. 1" (25 mm)
Collet Check Capacity 1/4" (6.35 mm)
Weight 4.3 lbs (1.95 kg)
WARNING: NEVER use an abrasive wheel, cutting wheel, or any wheel
greater than 1" in diameter. Using such wheels can result in
wheel breakage, and will otherwise increase the risk of bodily
injury from contact with the wheel or wheel fragments.
FUNCTIONAL DESCRIPTION
NOTE:
The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.
NAME OF PARTS
Collet
chuck
Bearing lid
(B)
Switch
Spindle
Inner cover (B)
Nose bracket
Housing
Brush cap
Tail cover
01Eng_GP2_US 08/2/28, 20:419