Filter
Top Products
— 8 —
English
SPECIFICATIONS
Operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
2
)
Dimensions
14 - 3/8" × 10" × 3"
Length × Height × Width
(365 mm × 254 mm × 76 mm)
Weight 4.4 lbs. (2.0 kg)
Nail capacity 150 Staples
.040 ft
3
/cycle at 100 psi
Air consumption
(1.14 ltr/cycle at 6.9 bar)
(1.14 ltr/cycle at 7kgf/cm
2
)
Air inlet 3/8" NPT Thread
7.9mm
(.309")
1.45mm
(.057")
1.61mm
(.063")
50mm (2")
25mm (1")
Dimensions of staples
16 Gauge 7/16" Crown
Min. Max.
STAPLE SELECTION
Only staples shown in the Table below can be driven with
this Stapler.
ACCESSORIES
WARNING
ⅷ Accessories other than those shown below can
lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1 Eye protector 1
2 Allen wrench for M5 screw 1
1
OPTIONAL ACCESSORIES
... sold separately
⅜ Sequential Trip Mechanism Kit (Code No. 876762)
(Single Shot Parts)
⅜ Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder (Code No.877153)
4 oz. (120 cc) oil feeder (Code No.874042)
1 quart (1 ltr) can (Code No.876212)
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.
APPLICATIONS
⅜ Construction work such as wall sheathing, roof
decking, subflooring.
⅜ Mobile and modular home construction.
⅜ Making wooden boxes, and expendable pallets.
BEFORE OPERATION
Read section titled “SAFETY” (pages 4 – 6).
Make sure of the followings before operation.
WORKING ENVIRONMENT
WARNING
ⅷ No flammable gas, liquid or other flammable
objects at worksite.
ⅷ Clear the area of children or unauthorized
personnel.
AIR SUPPLY
DANGER
ⅷ Never use oxygen, combustible gases or any other
bottled gases.
2