Filter
Top Products
English
15
Removing the nails:
1 Pull the nail feeder (B) backward.
2 Return the nail feeder (B) forward quietly
while pushing the nail feeder (A).
3 Push the nail stopper toward the
magazine side, and pull out nails from
the back of the magazine.
(2) Slide the nail strip forward in the
magazine.
The nail strip should pass the nail
stopper.
(3) Pull the nail feeder (B) back to engage
the nail feeder (A) to the nail strip.
NOTE:
● Quietly push the Nail Feeders (A) and (B)
against the nail.
If the Nail Feeders (A) and (B) are released
from backward the magazine and bumped
against the nail, the connecting paper of
the nail can be damaged.
● Use nail strip of more than 5 nails.
The Nailer is now ready to operate.
NAILER OPERATION
Read section titled “SAFETY”(pages 4 – 7).
DANGER
● Operators and others in
work area MUST wear
safety glasses with side
shields which conforms
to ANSI Z87.1
specifications.
WARNING
● NEVER point tool
at yourself or
others in work
area.
Nail Stopper
Nail Feeder (B)
Nail Feeder (A)
5
1
2
Nail Feeder (B)
Nail Feeder (A)
3
Nail Stopper
Nails
01Eng_NR90AD(S)_US 11/19/10, 2:16 PM15