Filter
Top Products
English
9
SPECIFICATIONS
Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NR90AD (S) NR90AE (S)
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
2
)
18-3/16" × 12-11/16" × 4-15/16" 20-3/4" × 12-11/16" × 4-15/16"
(462 mm × 322 mm × 125 mm) (527 mm × 322 mm × 125 mm)
7.0 lbs. (3.2 kg) 7.5 lbs. (3.4 kg)
50 – 74 nails (2 strips) 64 – 70 nails (2 strips)
.088 ft
3
/cycle at 100 psi
(2.5 ltr/cycle at 6.9 bar)
(2.5 ltr/cycle at 7 kgf/cm
2
)
3/8 NPT Thread
NAIL SELECTION
WARNING
● Be sure to use only the genuine HITACHI nails for the NR90AD (S)
or the NR90AE (S). The use of any other nails can result in tool
malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
.148"
(3.8 mm)
3-1/2" (90 mm)
.303"
(7.7 mm)
.113"
(2.9 mm)
2" (50 mm)
.266"
(6.8 mm)
NR90AD (S)
Paper collated strip nails Min. Max.
Clipped-head nails
01Eng_NR90AD(S)_US 11/19/10, 2:16 PM9