Hitachi NR 90GC Nail Gun User Manual


 
— 4 —
English
SAFETY
IMPORTANT SAFETY INSTRUCTIONS FOR USING NAILERS
READ ALL INSTRUCTIONS
This Nailer is powered by internal combustion device. This Nailer shall only be used with
dispensers for combustible gas which are listed in this instruction manual.
DANGER
1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS.
When operating the Nailer, always wear safety glasses with side shields, and make sure others in
work area wear safety glasses, too.
Safety glasses must conform to the requirements of American National Standards Institute, ANSI
Z87.1 and provide protection against flying particles both from the front and side.
The employer must enforce the use of safety glasses by the Nailer operator and others in work
area.
2. NEVER USE IN PRESENCE OF FLAMMABLE LIQUIDS OR GASES.
This Nailer must not be used in a combustible environment or in presence of flammable liquids or
gases, e.g. lacquer, paint, benzine, thinner or gasoline.
This Nailer produces hot exhaust gases that may ignite flammable materials and produces sparks
during operation.
3. DO NOT TOUCH AROUND THE EXHAUST OUTLET.
This Nailer produces hot exhaust gases that may flammable materials.
The push lever and nose will become hot and get heated up after prolonged or rapid use.
Do not touch with bare hands.
4. EXPLOSION AND FIRE HAZARD.
The fuel cell is an aerosol dispensers with flammable contents.
Pressured container and the propellant will remain in the fuel cell.
Faillure to follow instructions may result in explosion or fire.
Keep the Nailer, fuel cells and battery away from sunshine and from
temperature exceeding 120°F (50°C).
Fuel cell and/or battery may burst, releasing flammable gas.
Do not pierce or burn the container, even after use.
Do not incinerate, refill, reclaim or recycle the fuel cell.
Do not spray to a naked flame or any incandescent material.
Keep away from ignition sources – No smoking.
Keep out of the reach of children.
120°F MAX
(50°C)