Filter
Top Products
English
18
ACCESSORIES
DANGER
ⅷ Accessories other than those shown
below can lead to malfunction and
resulting injuries.
STANDARD ACCESSORIES
1
2
3
8
0
6
7
5
9
4
1 Safety glasses ....................................... 1
2 Battery ...................................................1
3 Charger .................................................. 1
4 Cigarette lighter connecting plug ........1
5 AC adapter ............................................ 1
6 Allen wrench for M4 screw .................. 1
7 Allen wrench for M5 screw .................. 1
8 Nose cap (mounted on tool)
(except NT50GS) ...................................1
9 Nose cap (mounted on tool)
(only NT50GS) ...................................... 1
0 Case .......................................................1
OPTIONAL ACCESSORIES
sold separately
⅜ Fuel Cell (Code No. 728-981)
⅜ Lubricant oil (Code No. 885-546, No. 728-
986)
⅜ Degreaser/cleaner (Code No. 728-985)
NOTE: Accessories are subject to change
without any obligation on the part
of HITACHI.
APPLICATIONS
<NT65GS, NT50GA, NT50GB>
⅜ Nailing as finishing process for areas
around the doors, windows as well as
edgings.
⅜ Securing the bottom of drawers. Making
various cases and cabinets.
<NT50GS>
⅜ Cabinet and picture frame assembly,
furniture trim.
⅜ On-site and mobile home trim and
molding.
CHARGING METHOD
NOTE: Before plugging into the receptacle,
make sure the following points.
⅜ The power source voltage is stated
on the nameplate.
⅜ The cord is not damaged.
WARNING
ⅷ Do not charge at voltage higher than
indicated on the nameplate.
If charged at voltage higher than
indicated on the nameplate, the
charger will burn up.
1. Insert the charger connecting plug into
the connecting socket of the charger.
2. Connect to the power source.
When using the AC adapter
Insert the AC adapter into the receptacle.
01Eng_NT65GS_US 12/17/08, 18:4618