Hitachi SJ2002 Welding System User Manual


 
18
Parameter tables for user-settable functions follow these conventions:
Some parameters have 2nd motor equivalents, indicated by the x2xx
parameter codes in the left-most column.
Some parameters specify an option code. Where applicable, the
options codes will be in a bulleted list in the Name/Description
column.
The default values apply to all models unless otherwise noted for each
parameter... –FE(F) (Europe) / – FU (U.S.)
Some parameters cannot be edited during Run Mode, and certain
Software Lock settings (B031) can prohibit all edits. If in doubt, place
the inverter in Stop Mode or consult the inverter manual for details.
“F” Group: Main Profile Parameters
“A” Group: Standard Functions
Func.
Code
Name / Description
Default
Value
Set
Value
F001 Output frequency setting 0.0
F002 Acceleration (1) time setting 10.0
F202 Acceleration (1) time setting, 2nd motor 10.0
F003 Deceleration (1) time setting 10.0
F203 Deceleration (1) time setting, 2nd motor 10.0
F004 Keypad Run key routing
•00Forward •01Reverse
00
Func.
Code
Name / Description
Default
Value
–FE(F)/–FU
Set
Value
A001/
A201
Frequency source setting
00 Keypad potentiometer
01 Control terminal
02 Function F001 setting
03 ModBus network input
10 Calculate function input
01 / 00
A002/
A202
Run command source setting
01 Input terminal FW or RV (assignable)
02 Run key on keypad, or digital operator
03 ModBus network input
01 / 02