Hitachi W 6VB2 Power Screwdriver User Manual


 
7
English
17.Never leave tool running unattended. Turn power off.
Don’t leave tool until it comes to a complete stop.
18.Carefully handle power tools.
Should a power tool be dropped or struck against hard materials inadvertently,
it may be deformed, cracked, or damaged.
19.Do not wipe plastic parts with solvent.
Solvents such as gasolie, thinner, benzine, carbon tetrachloride, and alcohol may
damage and crack plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry
thoroughly.
SPECIFIC SAFETY RULES AND SYMBOLS
1. Hold tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a “live”
wire will make exposed metal parts of the tool “live” and shock the operator.
2. Wear ear plugs when using the tool for extended periods. Prolonged exposure
to high intensity noise can cause hearing loss.
3. Employ a driver bit appropriate for the screw diameter.
4. Apply the screw driver body perpendicularly to a screw head when driving a
screw.
5. Definitions for symbols used on this tool
V ... volts
Hz ... hertz
A ... amperes
n
o ... no load speed
W ... watt
... Class II Consruction
- - -/min ... revolutions per minute