— 8 —
English
STAPLE SELECTION
Only staples shown in the Table below can be driven with
this Stapler.
Dimensions of staples
16 Gauge 1" Crown
Min. Max.
ACCESSORIES
WARNING
ⅷ Accessories other than those shown below can
lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
... sold separately
⅜ Sequential Trip Mechanism Kit (Code No. 876762)
(Single Shot Parts)
⅜ Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder (Code No.877153)
4 oz. (120 cc) oil feeder (Code No.874042)
1 quart (1 ltr) can (Code No.876212)
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.
APPLICATIONS
⅜ Insulation sheathing.
⅜ Wire lathing.
BEFORE OPERATION
Read section titled “SAFETY” (pages 4 – 6).
Make sure of the following before operation.
WORKING ENVIRONMENT
WARNING
ⅷ No flammable gas, liquid or other flammable
objects at worksite.
ⅷ Clear the area of children or unauthorized
personnel.
AIR SUPPLY
DANGER
ⅷ NEVER use oxygen or
other bottled gases.
Explosion may occur.
SPECIFICATIONS
Operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
2
)
Dimensions 14-3/8" × 9-13/16" × 3-11/32"
Length × Height × Width (365 mm × 250 mm × 85 mm)
Weight 4.7 lbs. (2.1 kg)
Nail capacity 150 Staples
.037 ft
3
/cycle at 100 psi
Air consumption
(1.05 ltr/cycle at 6.9 bar)
(1.05 ltr/cycle at 7 kgf/cm
2
)
Air inlet 3/8" NPT Thread
1 Safety glasses 1
2 Allen wrench for M5 screw 1
1 2
.917"
(23.3mm)
.057"
(1.45mm)
2" (50mm)
1" (25mm)
.063"
(1.61mm)