Filter
Top Products
OM-947 Page 30
SECTION 9 − FCAW/GMAW WELDING GUIDELINES
9-1. Typical FCAW Process Connections
Wire Feeder/
Power Source
Workpiece
Gun
Work Clamp
FCAW/GMAW1 2011−03 − Ref. 803 444-A
Self-Shielding Flux
Core Wire
! Weld current can damage
electronic parts in vehicles.
Disconnect both battery
cables before welding on a
vehicle. Place work clamp as
close to the weld as possible.
9-2. Typical GMAW (MIG) Process Connections
803 444-A
! Weld current can damage
electronic parts in vehicles.
Disconnect both battery
cables before welding on a
vehicle. Place work clamp as
close to the weld as possible.
Wire Feeder/
Power Source
Workpiece
Gun
Regulator/
Flowmeter
Gas Hose
Shielding
Gas
Work Clamp
Solid Wire