Filter
Top Products
OM-944 Page 23
Return To Table Of Contents
for 230 Volt Wire Welding Package
DCEN
DCEP
Wire Speed listed is a starting value only − Wire Speed setting can be
fine−tuned while welding. Wire Speed also depends on other variables
such as stick out, travel speed, weld angle, cleanliness of metal, etc.
keep torch as straight as possible. A ”push angle” for the torch is normally recommended.
Recommended Voltage and Wire Speed Settings for Thickness of Metal Being Welded.
Number on Left of Slash is Voltage Setting / Number on Right of Slash is Wire Feed Setting.
Electrode Negative
For Flux Core Wire
Electrode Positive
For Solid Wire
−−−
−−−
−−−
1/20
1/10
−−−
1/10
−−−
−−−
−−−
−−−
−−−
−−−
−−−
4/80
4/60
4/50
−−−
4/100
4/70
−−−
4/50
4/40
−−−
−−−
−−−
−−−
−−−
1/10
−−−
−−−
1/45
1/30
1/20
2/30
2/20
2/10
2/20
2/10
−−−
−−−
−−−
1/30
1/20
−−−
2/85
2/40
2/30
2/35
2/30
2/20
2/40
2/20
2/10
1/100**
1/95**
3/50
3/40
2/20
3/90
3/80
3/75
3/70
3/65
3/40
3/50
2/40
2/30
4/100**
4/90**
22 gauge
(.8 mm)
18 gauge
(1.2 mm)
16 gauge
(1.6 mm)
1/8 inch
(3.2 mm)
1/4 inch
(6.4 mm)
3/60
3/50
3/40
4/100
4/85
3/80
4/85
4/40
4/30
4/90
4/80
4/70
−−−
−−−
3/16 inch
(4.8 mm)
CHANGING
POLARITY
209 229