Hobart Welding Products 300 DC Welding System User Manual


 
OM-318 Page 10
2-3. Duty Cycle And Overheating
5 Minutes Welding 5 Minutes Resting
4 Minutes Welding 6 Minutes Resting
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, thermostat opens,
output stops, and cooling fan runs.
Wait fifteen minutes for unit to cool.
Reduce amperage or duty cycle be-
fore welding.
Y Exceeding duty cycle can
damage unit and void
warranty.
AC Mode: 40% Duty Cycle At 200 Amperes
Overheating
0
15
A
OR
Reduce Duty Cycle
Minutes
duty1 4/95 / SB-127 200-A / SB-127 199-A
DC Mode: 50% Duty Cycle At 300 Amperes
A. AC Mode
B. DC Mode
(CV or CC)