Filter
Top Products
OM-180 670 Page 21
4-3. Mode Switch Settings
The SMAW modes provide the Adaptive Hot Start feature, which automatically
increases the output amperage at the start of a weld should the start require it. This
eliminates electrode sticking at arc start.
NOTE
Mode Output Control
Lift-Arc Trigger
Hold TIG (GTAW)
Select: or Amp
Requires: Control
TIG (GTAW) With
HF Unit,
Pulsing Device,
Or Remote Control
Select: or Amp
Requires: Control
MIG (GMAW)
Select: or Volt
Requires: Feeder
Pulsed MIG
(GMAW-P)
(Requires an
external
pulsing device.)
Select: Volt
Requires: Feeder or Control
Remote
Control SMAW
Select: or Amp
Requires: Control
Panel Control
SMAW
Select: or Amp
Weld