Filter
Top Products
OM-186 165 Page 14
SECTION 3 – OPERATION
3-1. Controls
Ref. ST-139 026-B / Ref. ST-132 808-F
1 Wire Speed Meter (Optional)
2 Voltage Meter (Optional)
Use meter to set and display rate of
wire speed in inches per minute
(ipm).
3 Power Control Switch
4 Wire Speed Range Switch
5 Wire Speed Control
Use switch to select high or low wire
speed range. High range is 100 to
700 ipm. Low range is 50 to 350
ipm.
Use control to adjust wire speed
within range selected by switch.
6 Purge Switch (Optional)
Press switch to momentarily ener-
gize gas solenoid and purge air
from gun, and to adjust shielding
gas regulator.
7 CC/CV Switch
Use switch to match wire feeder
with welding power source output.
8 Rating Label Location
5
1
2
4
3
768