Husky HSK140HD Work Light User Manual


 
6
7. Replace handle and recharge port assemblies in one half of the housing body.
Make sure wires and connectors do not touch.
8. Place other half of housing body into position and replace three Phillips screws
(clockwise). Do not overtighten.
9. Follow steps 14 through 20 for bulb replacement to reassemble reflector, rubber O ring,
glass, retaining ring and rubber bezel. Charge the new battery using AC Recharge Adapter
for a minimum of 12 hours initially, then seven hours thereafter.
SAFE BATTERY DISPOSAL
Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed
of properly. Recycling is required, contact your local authority for information. Failure to
comply with local, state and federal regulations can result in fines, or imprisonment.
Battery Disposal Warnings:
Do not dispose of the battery in fire as this may result in an explosion.
Before disposing of the battery, protect exposed terminals with heavy-duty
electrical tape to prevent shorting (shorting can result in injury or fire).
Do not expose battery to fire or intense heat as it may explode.
For more information on recycling this battery,
call toll-free (877) 288-7722.
6. SPECIFICATIONS
Spotlight Bulb .......................................................................................... 6 volt, H3 series
Battery.........................................Maintenance free, sealed lead acid, 6 volt, 6 Amp Hour
Weight ............................................................................................... 3 lbs 2 oz (1.5 kg)
Length................................................................................................... 8.5 in (21.6 cm)
Width .................................................................................................... 6.0 in (15.3 cm)
Height (folded) ..................................................................................... 6.5 in. (16.5 cm)
RECYCLE NON-
SPILLABLE LEAD
ACID BATTERY