Husky HSK141HD Work Light User Manual


 
7
BATTERY DISPOSAL:
1.Non-spillable sealed lead-acid Battery - This battery is fully recyclable and should be
accepted at any location that accepts common automotive starter batteries. Examples of
places that accept these batteries are: County or municipal recycling drop-off centers,
scrap metal dealers, and retailers who sell automotive replacement lead acid starter
batteries. For more information on recycling this battery, call toll-free (877) 288-7722.
2.Before disposing of the battery, protect exposed terminals with heavy-duty tape to
prevent shorting (Shorting can result in injury or fire).
3. Do not expose battery to fire or intense heat as it may explode.
FUSE REPLACEMENT:
The plug of the DC Power/Charging adapter is equipped with a 10 amp cartridge fuse. If
this fuse blows, there may be a short circuit in the power cord or lamp assembly. The fuse
will blow if the battery is connected with reverse polarity. The fuse is accessed by unscrew-
ing (counter-clockwise) the tip of the large DC plug. Check the fuse with an ohmmeter or
other continuity checker. If the fuse is open, investigate why it blew and correct the problem
before replacing the fuse. Reassemble the DC plug and power the lamp from a 8 Amp or
greater 12 volt power supply.
SPECIFICATIONS
Spotlight Bulb .................................................................................. 12 volt, H3 series
Battery .................................. Maintenance free, sealed lead acid, 12 volt, 3 Amp Hour
Weight ......................................................................................... 6 lbs 2 oz (1.5 kg)
Depth .............................................................................................
9.0 in (22.9 cm)
Width .............................................................................................. 6.5 in (16.51 cm)
Height ............................................................................................ 11.5 in. (29.21 cm)
RECYCLE
FIGURE 5
BATTERY
HOLD DOWN
STRAPS (2)
HOLD DOWN SCREWS (4)
NEGATIVE
BATTERY
TERMINAL
BATTERY
POSITIVE BATTERY
TERMINAL