Filter
Top Products
English – 9
Protective instructions when
work is completed
• The transport guard must always be fitted to the cutting
attachment when the machine is not in use.
• Ensure the cutting attachment has stopped and remove the
spark plug cable from the spark plug before carrying out
cleaning, repairs or inspection.
• Always wear heavy gloves
when replacing the
cutters. The cutters are
extremely sharp and can
easily cause cuts.
• Store the machine out of
reach from children.
• Only use original spare
parts when carrying out
repairs.
SAFETY INSTRUCTIONS
Basic working techniques
• Make sure you have a
safe and steady working
position.
• Always use both hands to
hold the machine.
• Place the tip of the drill
on the ice.
• Open the throttle
gradually when the drill
begins to bite into the
ice.
• Keep a firm grip on the
handles and be ready to
take the weight when the
drill tip goes through the
ice.
• When you have finished
drilling for the time
being, drill a short
distance into the ice so
that the machine stands
up by itself. By leaving
the machine like this you
reduce the risk of anyone
accidentally coming into
contact with the cutters.
• Always turn off the
engine when you have
finished drilling.
A
B
C
Fitting the auger
• Fit the auger (A) to the
output shaft (B).
• Fit the screws (C) and
tighten using the Allen key
provided.