Filter
Top Products
38 – English
TECHNICAL DATA
Technical data
NOTE! This spark ignition system complies with the Canadian standard ICES-002.
545 545 TrioBrake 550XP
Engine
Cylinder displacement, cu.in/cm
3
3.06/50,1 3.06/50,1 3.06/50,1
Cylinder bore, inch/mm 1.69/43 1.69/43 1.69/43
Stroke, inch/mm 1.36/34,5 1.36/34,5 1.36/34,5
Idle speed, rpm 2800 2800 2800
Power, kW/hp @ rpm 2,5/3,4 @ 9600 2,5/3,4 @ 9600 2,8/3,8 @ 10200
Ignition system
Spark plug NGK CMR6H NGK CMR6H NGK CMR6H
Electrode gap, inch/mm 0.02/0,5 0.02/0,5 0.02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 0.89/0,49 0.94/0,52 0.89/0,49
Oil pump capacity at 9,000 rpm, ml/min 5-12 5-12 5-12
Oil tank capacity, US pint/litre 0.57/0,27 0.57/0,27 0.57/0,27
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg 10.8/4,9 11.0/5,0 10.8/4,9
Chain/bar
Standard bar length, inch/cm 15/38 15/38 15/38
Recommended bar lengths, inch/cm 13-20/33-50 13-20/33-50 13-20/33-50
Usable cutting length, inches/cm 12-19/31-49 12-19/31-49 12-19/31-49
Pitch, inch/mm 0.325/8,25 0.325/8,25 0.325/8,25
Thickness of drive links, inch/mm 0.050/1,3 0.050/1,3 0.050/1,3
0.058/1,5 0.058/1,5 0.058/1,5
Drive sprocket type/teeth Rim/7 Rim/7 Rim/7
Chain speed at max. power, m/sec 18,5 18,5 19,6
550XP TrioBrake 550XPG 550XPG TrioBrake
Engine
Cylinder displacement, cu.in/cm
3
3.06/50,1 3.06/50,1 3.06/50,1
Cylinder bore, inch/mm 1.69/43 1.69/43 1.69/43
Stroke, inch/mm 1.36/34,5 1.36/34,5 1.36/34,5
Idle speed, rpm 2800 2800 2800
Power, kW/hp @ rpm 2,8/3,8 @ 10200 2,8/3,8 @ 10200 2,8/3,8 @ 10200
Ignition system
Spark plug NGK CMR6H NGK CMR6H NGK CMR6H
Electrode gap, inch/mm 0.02/0,5 0.02/0,5 0.02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 0.89/0,49 0.94/0,52 0.89/0,49
Oil pump capacity at 9,000 rpm, ml/min 5-12 5-12 5-12
Oil tank capacity, US pint/litre 0.57/0,27 0.57/0,27 0.57/0,27
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg 11.0/5,0 11.2/5,1 11.4/5,2
Chain/bar
Standard bar length, inch/cm 15/38 15/38 15/38
Recommended bar lengths, inch/cm 13-20/33-50 13-20/33-50 13-20/33-50
Usable cutting length, inches/cm 12-19/31-49 12-19/31-49 12-19/31-49
Pitch, inch/mm 0.325/8,25 0.325/8,25 0.325/8,25
Thickness of drive links, inch/mm 0.050/1,3 0.050/1,3 0.050/1,3
0.058/1,5 0.058/1,5 0.058/1,5
Drive sprocket type/teeth Rim/7 Rim/7 Rim/7
Chain speed at max. power, m/sec 19,6 19,6 19,6